World Of Controls understands the criticality of your requirement and works towards reducing the lead time as much as possible.
IC3600A1AD1C1D - Low-Level Amplifier Circuit Board is available in stock which ships the same day.
IC3600A1AD1C1D - Low-Level Amplifier Circuit Board comes in UNUSED as well as REBUILT condition.
To avail our best deals for IC3600A1AD1C1D - Low-Level Amplifier Circuit Board, contact us and we will get back to you within 24 hours.
SPECIFICATIONS:
Part No: IC3600A1AD1C1D
Manufacturer: General Electric
Series: Mark II
Analog Input: 6 Voltage Input Channels
Voltage Ranges: ±5mV
Board Size: 2.8 cm high x 8.6 cm
Protected Voltage: -18 to +18V
Analog Low Pass Filter: 0.006 KHz
Common Mode Voltage: -5 to +5V
Input Impedance: 100M Ohm
Dimensions: 134.6mm x 130.3mm x 25.4mm
Weight: 0.45 kgs
Condition: New
Availability: In Stock
Country of Origin: USA
FUNCTIONAL DESCRIPTION:
IC3600A1AD1C1D is a Low-Level Amplifier Circuit Board manufactured and designed by General Electric as part of the Mark II Series used in GE Speedtronic Control Systems. This card is generally used when low-level signals are to be monitored, or if the cable between the Host computer and the card cage. The Amplifier Card for systems provides 6 independently configurable differential Analog Input Channels and 4 Universal Digital I/O channels. The cards are equipped with balanced differential inputs and distributed programmable gain, providing fine resolution for precise scaling into engineering units. Users can program the filter cutoff frequency and characteristics to tailor the measurement system to specific application needs. Two filter modes are available:
FEATURES OF LOW-LEVEL AMPLIFIER CIRCUIT BOARD:
Auxiliary Front-Panel Output Connection: A convenient auxiliary output connector on the front panel supports connection to Precision Filters’ output buffer modules, enabling users to add up to two independently buffered outputs per channel. This greatly enhances system versatility by supporting multiple simultaneous output paths for external recorders, analyzers, or redundant monitoring setups.
WOC has the largest stock of OEM Replacement Parts for GE Speedtronic Gas Turbine Control Systems. We can also repair your faulty boards and supply unused and rebuilt boards backed up with a warranty. Our team of experts is available around the clock to support your OEM needs. Our team of experts at WOC is happy to assist you with any of your automation requirements. For pricing and availability on parts and repairs, kindly contact our team by phone or email.
What is a Low-Level Amplifier Circuit Board?
A Low-Level Amplifier Circuit Board is designed to amplify very small input signals, typically from sensors or transducers, to higher voltage levels suitable for data acquisition or further signal processing.
What types of input signals can it handle?
The board is capable of handling a wide range of low-level input signals, including voltages from thermocouples, strain gages, RTDs, load cells, accelerometers, and other precision sensors.
What is the typical gain range of the amplifier?
The amplifier features programmable gain settings to accommodate various input signal strengths, typically ranging from 1x to over 10,000x depending on the model and configuration.
How does the board protect against signal overload?
The board features pre-filter overload detection, which monitors incoming signals before they pass through the filtering stages, allowing early identification and protection against signal saturation.