DS3800HMPK1L1K - Microprocessor Board

DS3800HMPK1L1K - Microprocessor Board DS3800HMPK1L1K - Microprocessor Board

World Of Controls understands the criticality of your requirement and works towards reducing the lead time as much as possible.

DS3800HMPK1L1K - Microprocessor Board is available in stock which ships the same day.

DS3800HMPK1L1K - Microprocessor Board comes in UNUSED as well as REBUILT condition.

To avail our best deals for DS3800HMPK1L1K - Microprocessor Board, contact us and we will get back to you within 24 hours.


Part No.: DS3800HMPK1L1K
Manufacturer: General Electric
Product Type: Microprocessor Board
Series: Mark IV

DS3800HMPK1L1K is a Microprocessor card under Mark IV series. The board is built to be installed quickly in the drive. On one end, the board has a modular connector, while on the other, it has retention levers. The GE Microprocessor Board DS3800HMPK1L1K additionally has three red indication LEDs and one amber LED that can be seen from the front. A CPU, erasable programmable read-only memory (EPROM) modules and a 34-pin connection are also included on the board. There are additionally two 50-pin connectors on the board.

  • A microprocessor socket houses the microprocessor. On the board, the microprocessor can be replaced. The process, however, must be carried out by a qualified servicer. The microprocessor can be removed from the board using a tool. Drops of thermally conductive paste should be evenly spaced on the surface of the socket while installing the replacement microprocessor. Then, align the microprocessor with the socket's suitable corner and force it into place.
  • It's possible that when you replace the CPU, you'll also need to change the EPROM modules. The firmware and programming instructions that govern the CPU are stored in EPROM chips. Check to see if fresh firmware and programming code are required if the microprocessor is a newer version. Static electricity protection measures must be used when replacing the modules.
  • A wrist strap is required for this. The wrist strap inhibits static energy buildup by providing a grounded surface for it to discharge. A metal desk leg, a metal stool, or workbench support can all be used as a grounded surface.

The most extensive collection of GE Speedtronic Mark IV control components can be found at World of Controls. Our experts are available to assist you with your Mark IV requirements at any time. If you require any additional information, please contact WOC as soon as possible.


Frequently Asked Questions


What is DS3800HMPK1L1K?
DS3800HMPK1L1K is a Microprocessor card under mark IV series.

How to Obtain DS3800HMPK1L1K?
World of Controls provides DS3800HMPK1L1K as well as other turbine control products. Contact WOC.