133396-01 - Overspeed Detection I/O Module

Specifications

Part Number : 133396-01
Manufacturer: Bently Nevada
Country of Manufacture: United States(USA)
Product Type: Overspeed Detection I/O Module
Series: 3500
Weight : 0.45 kg
Operating Temperature: -30 °C to +65 °C

133396-01 is an Overspeed Detection I/O Module developed by Bently Nevada. It is a part of Bently Nevada 3500/53 Electronic Overspeed Detection System. The Bently Nevada Electronic Overspeed Detection System for the 3500 Series Machinery Detection System is a highly dependable, quick response, redundant tachometer system designed for use as part of an Overspeed safety system. It is intended to fulfill the Overspeed protection requirements of American Petroleum Institute (API) Standards 670 and 612. Modules can be coupled to produce a 2-out-of-2 or 2-out-of-3 voting system (preferred). A 3500 rack with multiple power sources is required for the Overspeed Detection System.

Inputs Signal Specifications:

A single transducer signal from a proximity probe transducer or magnetic pickup is accepted by each Overspeed Detection module. The input signal has a voltage range of +10.0 V to -24.0 V. Signals that exceed this range are internally limited by the module.

133396-01 Front Panel LEDs

• OK LED: Indicates that the 3500/53 Module is in good working order.
• When the 3500/53 Module is talking with other modules in the 3500 rack, the TX/XR LED illuminates.
• If the 3500/53 Module is in Bypass Mode, the Bypass LED illuminates.
• When the 3500/53 is in Test Mode, the Test Mode LED illuminates.
• Alarm LEDs: Indicates that an alarm condition has occurred with the associated relay.

Transducer Conditioning

• Auto Threshold: Use for any input over 0.0167 Hz (1 rotation per event). The minimum triggering signal amplitude is 1 volt peak-to-peak.
• Manual Threshold: Selectable by the user from +9.9 Vdc to -23.9 Vdc. The minimum triggering signal amplitude is 500 millivolts peak-to-peak.
• Hysteresis: 0.2 to 2.5 volts, user-configurable.

Alarm Setpoints:

Speed may be changed to Under and Over Alert levels (setpoints). A Danger (Overspeed) setpoint can also be set for speed. All alarm setpoints are configured using software. Alarms are customizable and may typically be adjusted from 0 to 100% of the full-scale range of speed.

Frequency Response Speed Input:

With a maximum full-scale range of 99,999 rpm and a maximum input frequency of 20 kHz, the 3500 Overspeed Protection Module will support from 1 to 255 events per revolution. The minimum input frequency for proximity transducers is 0.0167 Hz (1 rpm for 1 event/revolution), whereas the minimum input frequency for passive magnetic pickups is 3.3 Hz.

133396-01 Product Attributes

• Power Consumption: 8.0 watts, typical
• Transducer Power Supply: -24 Vdc, 40 mA maximum
• Environmental Sealing: Epoxy sealed
• Recorder : +4 to +20 mA. The values are proportionate to the full-scale range of the module (rpm).
• Short circuits on recorder output have no effect on module functioning.
• Weight : 0.45 kg

Environmental Limits

• Operating Temperature: -30 °C to +65 °C
• Storage Temperature: -40 °C to +85 °C
• Humidity: 95%, non-condensing.

WOC has the largest stock of Bently Nevada and we can repair your faulty spares with a warranty. Our team of experts are available round the clock to support your urgent needs related to critical spares, contact us.

 

Frequently Asked Questions

 

What is Bently Nevada 133396-01?
133396-01 is an Overspeed Detection I/O Module developed by Bently Nevada under the Bently Nevada 3500 series.

What is the Operating Temperature of the component?
The operating temperature of the component ranges from -30 degrees Celsius to +65 degrees Celsius

What is the storage Temperature of the component?
The storage temperature of the component ranges from -40 degrees Celsius to +85 degrees Celsius

How much does the component weigh?
The component weighs around 0.45 kg.

How much is the typical power consumption of the component?
8.0 watts is the typical power consumption of the component.

How to obtain 133396-01?
Contact WOC of Bently Nevada spare parts. We supply worldwide.