World Of Controls understands the criticality of your requirement and works towards reducing the lead time as much as possible.
IS215UCCAM06A - Compact PCI Processor Module is available in stock which ships the same day.
IS215UCCAM06A - Compact PCI Processor Module comes in UNUSED as well as REBUILT condition.
To avail our best deals for IS215UCCAM06A - Compact PCI Processor Module, contact us and we will get back to you within 24 hours.
SPECIFICATIONS:
Part Number: IS215UCCAM06A
Manufacturer: General Electric
Series: Mark VIe
Product Type: Compact PCI Processor Module
Microprocessor: Intel Ultra Low Voltage Celeron 650 MHz
Technology: Surface Mount
Operating System: QNX Neutrino
Humidity: 5 to 95 percent non-condensing
Altitude Operating: 0 to 10,000 ft. (3,000 m)
Altitude: Storage: 0 to 40,000 ft (12,000 m)
Common Mode Voltage Range: ±5 V
Dimensions: 11.00 x 9.00 x 3.00
Operating temperature: 0 to 60 °C
No.of Analog Voltage Inputs: 6
Repair: 3-7 Days
Availability: In Stock
Country of Origin: United States
Manual: GEH-6721Q
FUNCTIONAL DESCRIPTION:
IS215UCCAM06A is a Compact PCI Processor Module manufactured and designed by General Electric as part of the VIe Series used in GE Distributed Control Systems. The board uses a 650 MHz Intel Celeron processor. A 10BaseT/100BaseTX (RJ-45) Ethernet port provides connectivity to the Unit Data Highway (UDH). There are two PCI Mezzanine Card (PMC) sites and a watchdog timer. The UCCA to implement the Modbus communications and functions. The UCCA is a Slave station on an RS-232C data link that responds to commands from the Master. Messages are transmitted and received using the RTU transmission mode, where RTU transmits data in 8-bit bytes. The processor board is the compute engine of the Mark VIe controller.
INSTALLATION:
The CompactPCI (CPCI) rack is specifically engineered for wall-mounted installation, providing a robust and organized framework for housing processor modules, I/O cards, and related control system components. Proper installation of the CPCI rack is crucial to ensure system reliability, accessibility, and adequate cooling. Before mounting, refer to the provided drawing, which illustrates the exact placement of mounting hardware such as screws, brackets, and support fixtures. This drawing also helps determine the overall enclosure space needed to accommodate the modules, connectors, cabling, and airflow requirements.
OPERATION:
Bulk incoming power is supplied to the rack using one or two power connectors. The CPCI power supply converts the bulk input to ±12 V dc, 5 V dc, and 3.3 V dc. These voltages are distributed to the controllers and fans through the backplane. The P1 version contains a on/off switch located in the upper right panel. The switch is connected to the disable outputs pin of the power supply, which turns off power to the controllers and fans. The P2 version does not have a switch so power is removed by ejecting the power supplies, disconnecting the incoming bulk power plugs, or using a remote disconnect.
The CPCI power supply takes the incoming bulk power from the CPCI rack and creates ±12, 5, and 3.3 V dc. This power is provided to the backplane for use in the rack, mainly for the controller(s) and cooling fan. The CPCI rack can hold one or two power supplies. The power supplies plug directly into the backplane using a CPCI 47-pin connector. The power supply(s) are hot swap compliant and can be safely removed while powering down the CPCI rack.
WOC maintains the largest inventory of GE Distributed Control System (DCS) replacement parts, offering unused, refurbished, and rebuilt components, all backed by a warranty for reliability. Our team of experienced automation specialists is available 24/7 to support OEM requirements, troubleshooting, and system upgrades, ensuring minimal downtime and optimal performance of your control systems. Whether you need replacement boards, modules, or complete assemblies, WOC provides expert guidance on part selection, compatibility, and repair options. For pricing, availability, or technical assistance, please contact our team by phone or email, and we will promptly assist with all your automation needs.
What is a Compact PCI Processor Module?
A Compact PCI (cPCI) Processor Module is a modular computing board designed for industrial, telecom, and defense applications. It integrates CPU, memory, and I/O interfaces on a standardized 3U or 6U cPCI form factor, allowing high-performance computing in a rugged and compact design. Many modules support hot-swapping for maintenance without system downtime.
Which processors are supported?
Modules typically support Intel x86/x64 (Core i7, Xeon), ARM, or PowerPC/RISC processors. Clock speeds range from 1 GHz to 5 GHz, with single or multi-core options. The choice of processor affects performance, power consumption, and thermal requirements.
What memory and storage options are available?
Memory options include DDR3/DDR4 ECC or non-ECC RAM, ranging from 2 GB to 128 GB. Storage is provided via onboard NAND flash, SSD, or NVMe drives, usually up to 256 GB or higher. Some modules allow memory expansion via SODIMM slots or onboard sockets.
How is system monitoring and management handled?
Modules may support IPMI, PICMG 2.9, or onboard sensors to monitor temperature, voltage, and fan speed. Watchdog timers provide automatic system reset in case of failures. Remote management is essential for mission-critical or unattended systems.
