The uncertainty that COVID-19 has imposed upon our businesses, families, and communities is unprecedented. At WOC, we share your concerns and are committed to helping you through this challenging time. Follow WHO and GOVERNMENT Guidelines!!

DS200TCQEG1A - LM6000 I/O PROCESSOR

DS200TCQEG1A	-	LM6000 I/O PROCESSOR DS200TCQEG1A	-	LM6000 I/O PROCESSOR

World Of Controls understands the criticality of your requirement and works towards reducing the lead time as much as possible.

DS200TCQEG1A - LM6000 I/O PROCESSOR is available in stock which ships the same day.

DS200TCQEG1A - LM6000 I/O PROCESSOR comes in UNUSED as well as REBUILT condition.

To avail our best deals for DS200TCQEG1A - LM6000 I/O PROCESSOR, contact us and we will get back to you within 24 hours.

SPECIFICATIONS

Part Number: DS200TCQEG1A
Manufacturer: General Electric
Series: Mark V
Function: LM6000 I/O Processor

DS200TCQEG1A is an LM6000 I/O Processor developed by General Electric.

  • 8 jumpers and 4 34-pin connections are included in the LM6000 I/O Processor Board DS200TCQEG1A. One programmable logic chip and many EPROMs are also included. JQQ, 3PL, and JLL are the IDs allocated to the 34-pin connectors.
  • The LM6000 I/O Processor Board DS200TCQEG1A also has a single LED positioned horizontally on the board. The board is 8.5 inches wide and 11 inches tall, with four holes for fastening the board to the drive's board rack on the inside.
  • Heat sinks are also placed on the board to cool some of the board's components that get hot during operation. The heat sinks protrude from the board's surface, potentially damaging nearby boards or components. There is a risk that the heat sink will scrape against other components during installation, causing components to break off the board.
  • When the board is lifted into or removed from the drive, it is also possible that the heatsink will be snapped off. If you want to avoid this, make sure you have a clear view of the board as you move it around the cabinet. Working gently is the best method.
  • When inspecting the drive's interior, take note of where the board is situated and how the wires are attached to it. Install the replacement in the same spot as the original. The board can't be sandwiched closely with other boards because it's filled with heatsinks. The heatsinks necessitated additional airflow around the board.

World of Controls has the most extensive range of Speedtronic Mark V control spare parts. World of Controls' experts is always available to help you with your GE Mark V requirements. Please contact us if you require any other information.

 
FREQUENTLY ASKED QUESTIONS

 

What signals does DS200TCQEG1A condition and scale?

The DS200TCQEG1A scales and conditions additional analog input and output signals. The DS200TCQEG1A can handle LVDT/R inputs, 4-20 mA outputs, LM vibration inputs, proximeter vibration inputs, proximeter position inputs, and RTD inputs, as well as magnetic pickup and TTL pulse rate inputs.

On the DS200TCQEG1A, what are jumpers JP1 and JP3?

On the DS200TCQEG1A, hardware jumpers JP1 and JP3 enable the oscillator for factory testing.

What connectors does the DS200TCQEG1A have?

There are seven connectors on the DS200TCQEG1A. The connectors on the DS200TCQEG1A are 2PL, 3PL, JJ, JJQ, JLL, JO, and JQQ. See section 5-4.13.1. of the Mark V LM Turbine Control Manual - Manual GEH-6353 for details of each of the DS200TCQEG1A's interfaces. For further information on how the connectors on the DS200TCQEG1A work, read sections 5.4.13.3 through 5.4.13.10.