DS200SDCCG1ABA - DRIVES/EX2000 USE ON

Specifications

Part No.: DS200SDCCG1ABA
Manufacturer: General Electric
Product Type: Drive Control Card
Series: Mark V

The DS200SDCCG1ABA is a GE Mark V series Drive Control Card. The principal controller for the drive is this General Electric Drive Control Board. The GE Drive Control Board DS200SDCCG1ABA has three microprocessors and RAM that can be accessed simultaneously by multiple microprocessors. The microprocessors are programmed to perform a variety of tasks.

• Motor control functions that demand more computing power are handled by a single microprocessor. Two more microprocessors handle signal I/O duties such as the watchdog timer and the direct memory access controller. One undertakes tasks that necessitate the use of highly specialized mathematical processing capabilities.
• You must keep in mind that static electrical build-up can harm the board. Static from your body and other metal structures can harm some of the board's components.
• All circuit boards should be treated as static sensitive, and there are recommendations you may follow to avoid any difficulties. Always wear a wrist strap when handling the board.
• The wrist strap is fastened to your wrist on one end and clips to a bare metal surface on the workbench or other metal structure on the other end.
• Some wrist bands have a plug that attaches to a connector on the workstation for convenience.
• Any static from the board or your body is drained to the ground provided by the bare metal in either case.
• When the board is not in use, make sure it is stored in the protective bag in which it was sent. Static is kept away from the board by the bag.

World of Controls has the most extensive range of Speedtronic Mark V control spare parts. WOC's professionals are always ready to assist you with your GE Mark V needs.
If you require any additional information, please contact us.

 

Frequently Asked Questions

 

What is DS200SDCCG1ABA?
The DS200SDCCG1ABA is a Mark V series drive control card.

What is DS200SDCCG1ABA made up of?
The core control circuitry and software for a drive or exciter are contained in the DS200SDCCG1ABA. The DS200SDCCG1ABA is equipped with three 16-bit microprocessors and interface circuitry that allows it to link to other boards to create various sorts of AC and DC motor drives. The DS200SDCCG1ABA's interface circuitry manages and handles drive and motor signals, as well as customer I/O.

On the DS200SDCCG1ABA, how are faults 1-399 displayed?
Faults 1-399 on the board is presented as a binary coded decimal pattern on the DS200SDCCG1ABA's interface. The blink rate of these faults on board is sluggish.

What are the DS200SDCCG1ABA testpoints for?
On the DS200SDCCG1ABA, the onboard testpoints are used for testing and troubleshooting.
Table 1 of the DS200SDCCG1ABA handbook, Manual GEI-100029, identifies and specifies each of the testpoints.

How can I get DS200PTBAG1AAA?
Contact World of Controls. WOC sells DS200PTBAG1AAA boards and other turbine control components.