World Of Controls understands the criticality of your requirement and works towards reducing the lead time as much as possible.
DS200FCRRG1A - FIRING CIRCUIT REPL. is available in stock which ships the same day.
DS200FCRRG1A - FIRING CIRCUIT REPL. comes in UNUSED as well as REBUILT condition.
To avail our best deals for DS200FCRRG1A - FIRING CIRCUIT REPL., contact us and we will get back to you within 24 hours.
Part Number: DS200FCRRG1A
Manufacturer: General Electric
Series: Mark V
Function: FIRING CIRCUIT BOARD
General Electric Speedtronic Mark V DS200FCRRG1A Firing Circuit Board is a part of the turbine control system. It includes a programmable logic device, as well as a terminal block with terminals for 95 signal lines, 10 2-pin connectors, 2 ribbon cables, and a programmable logic device. The 10 2-pin connectors' IDs start with a numerical value and terminate with PL. The numbers are assigned in order and printed on the board's surface for the installer or servicer to easily reference. Because there are numerous 2-pin wires connected to the connections, it's a good idea to keep track of where they're connected before disconnecting them. This will make configuration simple and reduce the possibility of downtime.
FREQUENTLY ASKED QUESTIONS
How Many EEPROMs are on DS200FCRRG1A?
There are six EEPROMs in the DS200FCRRG1A. The EEPROMs on the DS200FCRRG1A are located in front of the 2-pin terminal connectors on the DS200FCRRG1A.
What are the different types of Cables on the DS200FCRRG1A?
The two ribbon cables on the DS200FCRRG1A board are positioned in the left center of the board.
What are the Connectors on DS200FCRRG1A?
Connectors 1PL-6PL and 11PL-16PL are available on the DS200FCRRG1A. 14PL, 15PL, 16PL, 11PL, 12PL, and 13PL are the connectors on the top of the DS200FCRRG1A, respectively. 4PL, 5PL, 6PL, 1PL, 2PL, and 3PL are the bottom connectors on the DS200FCRRG1A.