World Of Controls understands the criticality of your requirement and works towards reducing the lead time as much as possible.
IS200TBCBH1A - RTD Contact Input Termination Module (4 - 20 mA) is available in stock which ships the same day.
IS200TBCBH1A - RTD Contact Input Termination Module (4 - 20 mA) comes in UNUSED as well as REBUILT condition.
To avail our best deals for IS200TBCBH1A - RTD Contact Input Termination Module (4 - 20 mA), contact us and we will get back to you within 24 hours.
SPECIFICATIONS:
Part Number: IS200TBCBH1A
Manufacturer: General Electric
Series: Mark VI
Product Type: RTD Contact Input Termination Module (4 - 20 mA)
Number of Channels: 24
Power Supply Voltage: 28 V DC
Voltage Range: 14 to 32 V DC
Mounting: DIN Rail Mounting
Technology: Surface Mount
Operating Temperature: -30 to 65 �C
Dimensions: 33.02 cm high x 17.8 cm wide
Repair Time: 3 - 7 days
Availability: In Stock
Country of Origin: United States
Manual: GEH-6153
IS200TBCBH1A is an RTD Contact Input Termination Module (4 - 20 mA) designed and manufactured by General Electric as part of the Mark VI Series used in GE Speedtronic Gas Turbine Control Systems. The Termination Module RTD and 4-20 mA Input (TBCB) is in location seven of the R5 core. RTD and mA input signals are landed on the TBCB terminal board. Eight of the 4 -20 mA input signals have the option to be configured using hardware jumpers to be 0 -1 mA input signals. The signals connected to the TBCB terminal board are written to the TCCB board in the R5 core.
Connection: It allows the RTD sensor's wires to be securely connected to the control system or data acquisition equipment. This ensures a reliable electrical connection between the sensor and the measurement circuit.
Termination: The module provides a termination point for the RTD wires, preventing them from being left exposed or vulnerable to damage. It also simplifies the installation process by offering a standardized connection interface.
Signal Conditioning: In some cases, the RTD termination module may include signal conditioning circuitry to amplify or filter the RTD signal before it is sent to the measurement device. This can help improve the accuracy and reliability of temperature measurements.
Compatibility: RTD termination modules are designed to be compatible with various types of RTD sensors, such as Pt100, Pt1000, or other custom resistance-based temperature sensors.
TBCBH1A CONNECTORS:
JHH - Writes the mA input signals to the TCCB board in the
JII - Writes the RTD signals to the TCCB board in the
TBCBH1A HARDWARE CONFIGURATION:
BJ1 - through BJ22 - Connects the mA input signals #1 through #22 to DCOM. BJ23 - through
BJ30 - Configures mA input signals #15 through #22 to either a 0 -1 mA or a 4 -20 mA current range.
World of Controls maintains an extensive global stock of genuine OEM replacement parts for GE Mark VI Speedtronic control systems. The TBCBH1A RTD Contact Input Termination Module is available in UNUSED surplus and fully REBUILT conditions, covered by complete warranty protection. Every unit undergoes comprehensive inspection and electrical bench testing by experienced technical personnel to verify fuse holder continuity, voltage bus isolation, terminal integrity, and surge circuit health prior to dispatch. We also offer fast repair and exchange services to help power generation facilities prevent costly downtime. Contact our sales team today to check live stock, request a quote, or arrange quick worldwide delivery.
What is the GE IS200TBCBH1A?
The GE IS200TBCBH1A is an RTD Contact Input Termination Module used in GE Speedtronic Mark VI turbine control systems. It acts as the physical wiring interface for 24 field discrete contact inputs, conditioning signals before routing them to control rack I/O cards.
What are the JHH and JII connectors used for on the TBCBH1A?
The JHH connector is associated with routing the mA input signals to the TCCB board in the R5 core. The JII connector is used for routing the RTD signals to the TCCB board. These connectors provide the interface between the termination module and the associated Mark VI control circuitry.
What are BJ1 through BJ22 used for on the TBCBH1A?
BJ1 through BJ22 are hardware configuration jumpers associated with the mA input signals. They connect the corresponding mA input signals #1 through #22 to DCOM. Their configuration should follow the requirements of the specific Mark VI control system application.
What is the function of BJ23 through BJ30?
BJ23 through BJ30 are used to configure selected mA input signals for different current ranges. The hardware configuration allows mA input signals #15 through #22 to be selected for either 0–1 mA or 4–20 mA operation. Correct jumper settings are required for the intended field instrumentation.
