DS200TCQAG2BDC - RST Analog I/O Board

SPECIFICATIONS

Part Number: DS200TCQAG2BDC
Manufacturer: General Electric
Product Type: RST Analog I/O Board
Series: Mark V

Four 34-pin connectors, two 40-pin connectors, and six jumpers are included on the GE RST Analog I/O Board DS200TCQAG2BDC. A set of six integrated LED lights is also included on the board. The jumpers on the DS200TCQAG2BDC serve a variety of functions on the board, so it's crucial to understand which ones you can adjust and how they'll affect the board's behavior. Some jumpers are used for quality control during the manufacturing process.

• A specific jumper may be moved to test a circuit or function while being tested for flaws. The jumper is then returned before being transported. The customer can use the other jumpers to customize the board for a specific function or behavior.
• When replacing the board, inspect the old board and set the jumpers on the replacement board one by one to match the old board's positions. It's possible that the replacement board is a later version of the original. When new versions are built with changes, you may notice that jumpers are relocated or eliminated from the newer version.
• In the newer version, other components may be relocated or depopulated. There is documentation available that explains workarounds or why a jumper was removed from the board. Between versions of the same model board, reliability and compatibility are guaranteed. Product testing is carried out to ensure that the versions are compatible.

WOC has the largest stock of Speedtronic Mark V Spares and we can repair your faulty spares with a warranty. WORLD OF CONTROLS can also supply UNUSED and REBUILT components backed up with a warranty. Our team of experts are available round the clock to support your urgent needs related to critical spares, contact us.

 

FREQUENTLY ASKED QUESTIONS

 

What is the purpose of jumper J7 on the DS200TCQAG2BDC?

The J7 jumper on the board is used for card tests on the RS-232 port.

 

On the DS200TCQAG2BDC, which input signals are scaled and conditioned?

The signals scaled and conditioned on the board are 4-20 mA input signals such as fuel flow pressure and compressor stall detect signals.

 

What is the number of connectors on the DS200TCQAG2BDC?

There are eight connectors on the board - 2PL, 3PL, JA, JB, JD, JE, JF, and JG.