The uncertainty that COVID-19 has imposed upon our businesses, families, and communities is unprecedented. At WOC, we share your concerns and are committed to helping you through this challenging time. Follow WHO and GOVERNMENT Guidelines!!

DS200TCDAH1B - DIGITAL I/O BOARD

DS200TCDAH1B - DIGITAL I/O BOARD DS200TCDAH1B - DIGITAL I/O BOARD

World Of Controls understands the criticality of your requirement and works towards reducing the lead time as much as possible.

DS200TCDAH1B - DIGITAL I/O BOARD is available in stock which ships the same day.

DS200TCDAH1B - DIGITAL I/O BOARD comes in UNUSED as well as REBUILT condition.

To avail our best deals for DS200TCDAH1B - DIGITAL I/O BOARD, contact us and we will get back to you within 24 hours.

SPECIFICATIONS

Part Number: DS200TCDAH1B
Manufacturer: General Electric
Series: Mark V
Product Type: Digital I/O Board

One microprocessor and many programmable read-only memory (PROM) modules are included in the GE Digital I/O Board DS200TCDAH1B. It also includes a 10-LED block and two 50-pin connectors. The GE Digital I/O Board DS200TCDAGH1B also has eight jumpers and one visible LED on the side of the board. Two 3-pin connectors are also included on the GE Digital I/O Board DS200TCDAH1B. The ID JX1 is on one of the three-pin connectors, whereas the ID JX2 is on the other.

  • JP is prefixed to the IDs assigned to the eight jumpers. One jumper, for example, has the ID JP1. The ID JP2 is allocated to another jumper, and so on. The IDs of the test points have a prefix as well. TP is the prefix for the test points. One test point, for example, is given the ID TP1. The ID TP2 is assigned to another test point. A servicer can test the individual circuits on the board with a qualified testing device and find an issue that may be repairable.
  • Other boards installed in the drive are DS200DTBA and DS200DTBB. Through the 50-pin connectors, both receive signals from the GE Digital I/O Board DS200TCDAH1B. ID JQ is assigned to one 50-pin connector, whereas ID JR is assigned to the other 50-pin connector. On the DS200DTBA, the connector JQ connects to the JQR connector. The signals between the boards are transmitted using 50-pin ribbon wires. The contact input signal from DS200DTBB is received by connector JR.
  • WOC has the largest stock of Speedtronic Mark V control spares. We can repair your faulty DS200TCDAH1B. WORLD OF CONTROLS can also supply unused and rebuilt DS200TCDAH1B backed up with a warranty. Our team of experts is available round the clock to support your DS200TCDAH1B needs.
  • Our team of experts at WOC is happy to assist you with any of your automation requirements. Please contact our staff by phone or email for pricing and availability on any parts and repairs.

 

FREQUENTLY ASKED QUESTIONS

 

On the DS200TCDAH1B, what is the purpose of connection JQ?

The JQR socket on the DTBA board is connected to connector JQ on the DS200TCDAH1B. JQ transfers the contact input signals from the DTBB board to DS200TCDAH1B for DS200TCDAH1B.

The DS200TCDAH1B transmits over which network?

After processing the digital input signals, DS200TCDAH1B broadcasts across the IONET network.

What is the function of DS200TCDAH1B?

The digital contact input signals from the DTBA and DTBB terminal boards, as well as the contact output signals from the two TCRA boards, are processed by the DS200TCDAH1B.