DS215DMCBG1AZZ01A - DMCBG1 & FW

SPECIFICATIONS

Part Number: DS215DMCBG1AZZ01A
Manufacturer: General Electric
Series: Mark V
Function: FIRMWARE

General Electric Mark V DS215DMCBG1AZZ01A Drive Board component was created for use in the Mark V Speedtronic system, which is used to control gas and steam turbine systems. In comparison to a similarly-named DS200 board, the DS215DMCBG1AZZ01A is a Drive board with improved hardware and/or firmware. It's a densely packed board with five vertical cable connectors (four male and one female).

• Three vertical header connectors, three stab-on connectors, and more than twenty jumper switches are also included. It contains a reset switch in the upper left quadrant that allows you to reset the board without turning it off first.
• During operation, the LED indicators inform the operator of the board's status. An inductor coil, multiple test points for monitoring board voltages, and over fifty-five integrated circuits, including oscillation chips, field-programmable gate arrays, and EPROM chips for data storage, are also included on the board.
• Resistor network arrays, transistors, and different capacitors, diodes, and resistors are all used. It is populated by two auxiliary boards, one vertically mounted and the other horizontally mounted, both of which are positioned in the bottom left corner.
• WOC has the largest stock of Speedtronic Mark V control spares and we can repair your faulty DS215DMCBG1AZZ01A with a warranty of 12 months.

WORLD OF CONTROLS can also supply UNUSED and REBUILT DS215DMCBG1AZZ01A cards backed up with a warranty of 24 months. Contact us, Our team of experts are available round the clock to support your Mark V DS215DMCBG1AZZ01A needs.

 

FREQUENTLY ASKED QUESTIONS

 

What is a light-emitting diode (LED) Indicator?

The LED indicator is positioned on the top left of your device's front. It can show a variety of colors, including blue, red, and green. These colors represent your device's normal notifications and functions.

What is the Function of a Motor Control Board?

A motor control center is a system for centrally controlling some or all electric motors. It is made up of many covered parts connected by a common power bus, each with a combination starter that includes a motor starter, fuses or circuit breakers, and a power disconnect.

Why are jumpers used in PCB?

When there are no other options, jumpers are a convenient way to cross a trace on a printed circuit board. When used with a male header, shunts can either be soldered in or removed from a board. This would make it possible to do things like configure a circuit board or reroute a signal on a board.

What is the Phone Number for WOC?

Please contact World of Controls FZE for sales at +1 609 385 1231

Does the DS215DMCBG1AZZ01A have a Warranty?

WOC can also supply UNUSED and REBUILT DS215DMCBG1AZZ01A backed up with a warranty of 24 months.

How long does it take for a WOC DS215DMCBG1AZZ01A to Ship?

WOC maintains a large inventory and can fulfill many orders the same day. Please contact us for additional information.