World Of Controls understands the criticality of your requirement and works towards reducing the lead time as much as possible.
IS230SNAIH2A, REV A - Analog DIN Rail Input/Output Module is available in stock which ships the same day.
IS230SNAIH2A, REV A - Analog DIN Rail Input/Output Module comes in UNUSED as well as REBUILT condition.
To avail our best deals for IS230SNAIH2A, REV A - Analog DIN Rail Input/Output Module, contact us and we will get back to you within 24 hours.
SPECIFICATIONS:
Part Number: IS230SNAIH2A, REV A
Manufacturer: General Electric
Series: Mark VIe
PCI bus: 32-bit/33MHz
Product Type: Analog DIN Rail Input/Output Module
Analog Inputs: 8 inputs
Digital Inputs: 16 inputs
A/D resolution: 16 bits
Supported Signal Types: Voltage, current, resistance
Mounting Type: DIN rail
Common Mode Voltage Range: +5 V dc
Maximum lead resistance: 15 Ohms
Output Load: 500 Ohms for 4-20 mA
Configuration: Simplex
Operating temperature: -30°C to +65°C
Size: 10.16 cm wide x 33.02 cm
Frequency: 50 or 60 Hz
Repair: 3-7 days
Availability: In Stock
Weight: 2 lbs
Country of Origin: United States
FUNCTIONAL DESCRIPTION:
IS230SNAIH2A, REV A is an Analog DIN Rail Input/Output Module manufactured and designed by General Electric as part of the Mark VIe Series used in GE Distributed Turbine Control Systems. It provides eight analog inputs and eight analog outputs, enabling the control system to accurately monitor sensor data and control field devices through analog signals such as voltage, current, and resistance. This module translates real-world analog signals into digital data that the control system can process and converts digital control commands back into analog signals for actuators or other output devices. The module is essential for precise industrial automation and process control, offering robust communication through the system’s backplane interface. Its DIN rail mounting allows for easy installation and replacement in control cabinets.
INSTALLATION:
The module is designed for mounting on a standard DIN rail inside the control cabinet. Before installation, ensure that the control system chassis supports this module type and that the backplane is compatible with Mark VIe or Mark VIeS systems. The module should be aligned and snapped securely onto the DIN rail to ensure proper mechanical and electrical connections. Wiring for analog inputs and outputs must be connected through the appropriate terminal board, typically the IS200STAI, which facilitates secure and organized wiring. It is important to observe proper electrostatic discharge (ESD) precautions when handling the module to prevent damage. Power to the control system should be turned off during installation or removal to avoid electrical hazards or data corruption. After physical installation, system configuration and diagnostics should be performed to verify that the module is correctly recognized and functioning as expected.
OPERATION:
The module continuously converts analog sensor inputs into digital signals for processing by the turbine control system. Similarly, it converts digital output signals generated by the control logic into analog voltage or current signals to control actuators and other external devices. The module operates with minimal latency, providing real-time data crucial for industrial process control. The control system regularly polls the module for updated inputs and sends output commands to maintain precise control of the plant or equipment. Onboard diagnostics monitor the quality and integrity of signals, alerting operators to faults or deviations. It is engineered to operate reliably within a wide temperature range from -30°C to 65°C, allowing it to perform effectively in demanding industrial environments. In case the module fails or is removed, the control system detects this condition and executes predefined safety protocols to maintain safe operations.
WOC boasts the largest inventory of replacement parts for GE Distributed Turbine Control Systems. We provide warranty-backed, unused, and refurbished boards, along with expert repair services for damaged units. Our dedicated team of professionals is available 24/7 to support all your OEM and automation needs. For pricing, availability, or assistance, please reach out to us via phone or email. We’re here to help you every step of the way.
What input and output signal types are supported by the module?
The module supports analog inputs and outputs, including voltage, current, and resistance signals. It also provides digital input and output channels for discrete signals.
How is the module powered and connected to the control system?
The module receives power and communicates via the backplane connector of the GE Mark VIe or Mark VIeS chassis. It is mounted on a DIN rail inside the control cabinet.
What is the resolution and sampling rate of the A/D and D/A conversions performed by the module?
The module typically provides 16-bit resolution for both ADC and DAC conversions, with sampling rates sufficient to meet the timing requirements of turbine control (on the order of milliseconds per channel).
