5466-258 - Discrete I/O Module

5466-258 - Discrete I/O Module 5466-258 - Discrete I/O Module

World Of Controls understands the criticality of your requirement and works towards reducing the lead time as much as possible.

5466-258 - Discrete I/O Module is available in stock which ships the same day.

5466-258 - Discrete I/O Module comes in UNUSED as well as REBUILT condition.

To avail our best deals for 5466-258 - Discrete I/O Module, contact us and we will get back to you within 24 hours.


Part Number: 5466-258
Manufacturer: Woodward
Product type: Discrete I/O Module
External input voltage: 18 to 32 Vdc
Power Supply Input: 18 to 32 Vdc
Power Required: 6.5 Watts at 24 Vdc
Repair: 3-7 Day
Availability: In Stock
Country of Manufacture: United States (USA)

Functional Description

5466-258 is a Discrete I/O Module developed by Woodward. The modules are inserted into card guides in the control's chassis and connected to the motherboard. Two screws, one at the top and one at the bottom of the front panel, hold the modules in place. There are also two handles at the top and bottom of the module that, when toggled (pushed outward), move the modules out just far enough for the boards to disengage the motherboard connectors.


  • Connect the Input Module to the appropriate network and 24 Vdc power and mount it on the DIN rail. If desired, the inputs can be wired using the internal +24 V connections or an external 24 V power source. Connect the discrete inputs.
  • Set the module address one and ten rotary switches according to the application setup. The system allows for the replacement of faulty nodes in real time. The network cable connections must be kept intact when replacing a node.
  • A faulty node can be disconnected from the network by removing both terminal blocks from their headers and the node from the DIN rail. The replacement node's address switches should be set to match those of the faulty node.
  • After that, the replacement node can be mounted on the DIN rail and the terminal blocks pushed into the headers. To restart communications with the controller module and clear the no message fault, the node must be reset using the application program.

World of Controls has the most comprehensive selection of GE and Woodward components. Our professionals are available to help you with your requirements at any time. If you require any additional information, please contact WOC immediately.

Frequently Asked Questions

What is 5466-258?
It is Discrete I/O Module developed by Woodward.

How many discrete inputs does the Module provide?
The Module provides sixteen discrete inputs for field switches or relay contacts.

What voltage source is required for the inputs?
All sixteen inputs of the module require a +24 Vdc source.

Is there an internal power source provided?
Yes, the module is equipped with a filtered and fused internal power source for the discrete inputs.