DS3800HVDB - MKIV, Video Driver Card

SPECIFICATIONS

Part Number: DS3800HVDB
Manufacturer: General Electric
Series: Mark IV
Function: Input/Output Circuit Board

GE Speedtronic Mark IV DS3800HVDB I/O Circuit Board on the Gas Turbine Control System. The GE Video Driver Board DS3800HVDB is designed to fit into the drive quickly. On one end, the board has a modular connector, while on the other, it has retention levers. Between the retention levers on the GE Video Driver Board DS3800HVDB, there is also a 20-pin connector. Multiple erasable programmable read-only memory (EPROM) modules and 15 jumpers are also included on the board.

• The GE Video Driver Board DS3800HVDB has a 20-pin connector that allows an operator to add a ribbon cable once the board is put in a drive. The ribbon wire is less likely to be strained if it is connected after the board has been placed.
• The small wires in each of the 20 strands can pull out under stress. The signal connection would be lost as a result of this. If the ribbon cable is connected before the board is installed, you risk damaging the connections by mistakenly tugging on it.
• Retention latches are included on the 20-pin connector. The connector is held in place by the retention latches, which swing over it and prevent it from being removed.
• WOC has the largest stock of Speedtronic Mark IV control spares and we can repair your faulty DS3800HVDB with a warranty of 12 months.

WORLD OF CONTROLS can also supply UNUSED and REBUILT parts backed up with a warranty of 24 months. Our team of experts are available round the clock to support your Mark IV DS3800HVDB needs.

 

FREQUENTLY ASKED QUESTIONS

 

How many Pin Connectors in DS3800HVDB?

In the DS3800HVDB, 20 pin connectors are provided.

What are the three major parts of a gas turbine?

Compressor, combustor, and power turbine are the three primary components of a gas turbine. Air is sucked in and compressed to 30 times ambient pressure in the compressor portion before being sent to the combustor section, where fuel is delivered, ignited, and burned.

In a gas turbine, what cycle is used?

The Brayton cycle is the most fundamental thermodynamic cycle utilized in gas turbines.

How long does it take for a WOC DS3800HVDB to Ship?

WOC maintains a large inventory and can fulfill many orders the same day. Please contact us for additional information.