[email protected]
+1 832 946 3166
Instagram

IC693CPU331CE

IC693CPU331CE - CPU MODULE

IC693CPU331CE - CPU MODULE IC693CPU331CE - CPU MODULE

World Of Controls understands the criticality of your requirement and works towards reducing the lead time as much as possible.

IC693CPU331CE - CPU MODULE is available in stock which ships the same day.

IC693CPU331CE - CPU MODULE comes in UNUSED as well as REBUILT condition.

To avail our best deals for IC693CPU331CE - CPU MODULE, contact us and we will get back to you within 24 hours.

Request For Quote
Contact Us

Featured Product

SPECIFICATIONS

Part Number: IC693CPU331CE
Manufacturer: General Electric
Series: GE Fanuc
Function: Coprocessor Module

IC693CPU331CE is a Single Slot CPU Module and is part of the GE Fanuc Series 90-30 PLC Systems. The 80188 series microprocessor is used in the CPU module. The module's operating temperature ranges from 32 to 140 degrees Celsius. At 5 Volts DC input voltage, the CPU module occupies a single slot in a 5-slot baseplate and draws 350 milliamps of electricity from the backplane. The module's usual scan rate per 1K of Boolean logic is 0.4 milliseconds. System registers are allotted 16 words, which can only be viewed in the reference table and cannot be referenced in the user logic application. The IC693CPU331CE module can accommodate up to 680 timers and counters in total. RAM and optional EPROM or EEPROM memory are supplied on the module for data storage.

  • User application memory is limited to 16 kilobytes. A total of 512 discrete input points are available. A total of 512 discrete output points are available. The global memory is discrete and has a size of 1280 bits.
  • Analog inputs and outputs each have 128 and 64 words of RAM assigned to them, accordingly. The IC693CPU331CE module has one built-in serial port, which is accessible by the power supply PLC connector.
  • The SNP slave and SNPX slave protocols are among the protocols supported by the serial port. Support for SNP master, SNP-X master, CCM, and RTU slave requires a separate CMM module. RTU master support necessitates the use of a separate PCM module.


WOC carries a large stock of GE Fanuc Series Spares and can repair your faulty IC693CPU331CE. WARRANTIES ON REBUILD AND UNUSED COMPONENTS ARE ALSO PROVIDED BY THE WORLD OF CONTROLS. If you need assistance with your critical spares, please contact us.

FREQUENTLY ASKED QUESTIONS

What is the maximum number of extension modules that the IC693CPU331CE can support?

The CPU Module has four I/O extension slots and four remote I/O baseplates.

What is the maximum number of analog I/O words supported by the IC693CPU331CE?

The CPU Module has 128 analog input words and 64 analog output words.

What Communication interface does the CPU Module has built-in?

One serial port on the CPU Module supports the SNP and SNP-X protocols.