128276-01E - Half-Height Future Expansion Faceplate

128276-01E - Half-Height Future Expansion Faceplate 128276-01E - Half-Height Future Expansion Faceplate

World Of Controls understands the criticality of your requirement and works towards reducing the lead time as much as possible.

128276-01E - Half-Height Future Expansion Faceplate is available in stock which ships the same day.

128276-01E - Half-Height Future Expansion Faceplate comes in UNUSED as well as REBUILT condition.

To avail our best deals for 128276-01E - Half-Height Future Expansion Faceplate, contact us and we will get back to you within 24 hours.


Part Number: 128276-01E
Manufacturer: Bently Nevada
Country of Manufacture: United States(USA)
Product Type: 128276-01E
Series: Bently Nevada 3500

128276-01E is a Half-Height Future Expansion Faceplate developed by Bently Nevada. It is a part of the Bently Nevada 3500 series. The GE / Bently Nevada 3500/42 Series Proximitor /Seismic Monitor Modules have four channels and accept input from Proximitor and Seismic Transducers to drive alarms.


The 3500 Rack Configuration Software can be used to program the monitor to perform any of the following functions: radial vibration, thrust position, eccentricity, differential expansion, acceleration, and velocity. The monitor can receive input from a variety of transducers, including the Bently Nevada transducers: proximity, acceleration, and velocity.



  • The 3500/42 monitor's primary purpose is to provide
  • Machinery protection by continuously comparing current machine vibration to configured alarm setpoints to drive alarms
  • Essential machine vibration information to both operator and maintenance personnel.
  • The 3500 Rack Configuration Software is used to configure alarm setpoints. Alarm setpoints can be set for each active proportional value, and danger setpoints for two of the active proportional values.

Product Attributes

  • (4) Monitor Channels
  • Accepts Proximitor and Seismic Transducer Inputs
  • Protection for machinery

128276-01E Handling and Storing Considerations

When exposed to electrostatic charges, circuit boards contain devices that can be damaged. The warranty will be voided if the board is damaged due to obvious mishandling. To avoid damage, take the following precautions in the following order:

  • Avoid releasing static electricity onto the circuit board. Avoid using tools or procedures that could cause static damage to the circuit board. Ungrounded soldering irons, non-conductive plastics, and similar materials are among the possible causes.
  • Before handling or maintaining a printed circuit board, personnel must be grounded with a suitable grounding strap (such as 3M Velostat No. 2060).
  • Circuit boards should be transported and stored in electrically conductive bags or foil.
  • Be extra cautious in dry weather. Less than 30% relative humidity tends to multiply the accumulation of static charges on any surface.

World of Controls has the largest stock of Bently Nevada and we can repair your faulty spares with a warranty. We are available round the clock to support your urgent needs related to critical spares, contact us.


Frequently Asked Questions


What is Bently Nevada 128276-01E?
128276-01E is a Half-Height Future Expansion Faceplate developed by Bently Nevada under the Bently Nevada 3500 series.

How to obtain 128276-01E?
Contact WOC of Bently Nevada for requirements. Contact their team at +1 609 385 1231 or Request a Quote.