127610-01 - AC Power Supply Module

SPECIFICATIONS

Part No.: 127610-01
Manufacturer: Bently Nevada
Product Type: AC Power Supply Module
Series: 3500
Availability: In Stock
Operating Temperature:-30 to +65 degrees Celsius
Storage Temperature: -40 to +85 degrees Celsius
Humidity: 95%, non-condensing.
LED: Supply OK
Country of Manufacture: United States (USA)

Functional Description

127610-01 is a AC Power Supply Module developed by Bently Nevada. It belongs to the 3500 series of components. Power Supplies are half-height modules that must be installed in specially designed slots on the rack's left side. The rack can house one or two power supplies (any combination of ac and/or dc), with either supply capable of powering the entire rack. The second supply, if installed, serves as a backup for the primary supply. When two power supplies are installed in a rack, the lower supply serves as the primary supply and the upper supply serves as the backup supply. As long as a second power supply is installed, removing or inserting either power supply module will not disrupt rack operation. The Power Supplies accept a wide range of input voltages and convert them to voltages that other 3500 modules can use. With the Series Machinery Protection System, three Power Supply versions are available:

• AC Power
• High Voltage DC Power Supply
• Low Voltage DC Power Supply

Inputs Voltage Options

• High Voltage ac: This option uses the ac Power Supply and the High Voltage ac Power Input Module (PIM).
  • Input Voltage: 220 Vac nominal, 175 to 264 Vac rms, 247 to 373 Vac pk
  • Input Frequency: 47 to 63 Hz
• Low Voltage ac: This option uses the ac Power Supply and the Low Voltage ac Power Input Module (PIM).
• Input Voltage: 110 Vac nominal, 85 to 132 Vac rms, 120 to 188 Vac pk
  • Input Frequency: 47 to 63 Hz
• High Voltage dc: This option uses the High Voltage dc Power Supply and the High Voltage dc Power Input Module (PIM).
  • Input Voltage: 88 to 140 Vdc
• Low Voltage dc: This option uses the Low Voltage dc Power Supply and the Low Voltage dc Power Supply Input Module (PIM).
  
  • Input voltage: 20 to 30 Vdc
• Out of Range Protection: For all power supply versions, an under-voltage will not harm either the supply or the PIM. However, an over-voltage will cause the fuse to open on the PIM.

Full Rack Current Draw

• High Voltage AC: 2.3 A rms (maximum).
• Low Voltage AC: 4.5 A rms (maximum).
• High Voltage DC: 2.5 A (maximum).
• Low Voltage DC: 10.0 A (maximum).

World of Controls has the most comprehensive selection of GE and Bently Nevada components. Our professionals are available to help you with your Bently Nevada requirements at any time. If you require any additional information, please contact WOC immediately.

 

Frequently Asked Questions

 

What is 127610-01?
It is a AC Power Supply Module developed by Bently Nevada.

How many power supplies can the 3500 rack house?
It can house one or two power supplies (any combination of ac and/or dc), with either supply capable of powering the entire rack.

What is the purpose of the second power supply in a rack?
The second power supply, if installed, serves as a backup for the primary supply. When two power supplies are installed in a rack, the lower supply serves as the primary supply and the upper supply serves as the backup supply.

Will removing or inserting a power supply module disrupt rack operation?
As long as a second power supply is installed, removing or inserting either power supply module will not disrupt rack operation.

What range of input voltages do the Power Supplies accept?
It accept a wide range of input voltages and convert them to voltages that other 3500 modules can use.

What are the three versions of the Power Supply available with the 3500 Series Machinery Protection System?
The three versions are available with the 3500 Series Machinery Protection System are AC Power, High Voltage DC Power Supply, and Low Voltage DC Power Supply.