[email protected]
+1 832 946 3166
Instagram

Ds3800hdra Line Driver

DS3800HDRA - Line Driver/Receiver Board

DS3800HDRA - Line Driver/Receiver Board DS3800HDRA - Line Driver/Receiver Board

World Of Controls understands the criticality of your requirement and works towards reducing the lead time as much as possible.

DS3800HDRA - Line Driver/Receiver Board is available in stock which ships the same day.

DS3800HDRA - Line Driver/Receiver Board comes in UNUSED as well as REBUILT condition.

To avail our best deals for DS3800HDRA - Line Driver/Receiver Board, contact us and we will get back to you within 24 hours.

Request For Quote
Contact Us

Featured Product

SPECIFICATIONS

Part Number: DS3800HDRA
Manufacturer: General Electric
Series: Mark IV
Product type: Line Driver/Receiver Board
Availability: In Stock
Country of Manufacture: United States (USA)

DS3800HDRA is a line driver/receiver board developed by GE. It is a part of Mark IV control system

Features

  • The Board includes a modular connector for connecting to a drive and retention levers to keep the board in place. The Line Driver/Receiver Board also has two jumpers and several capacitors. The board also has two 40-pin connectors that are accessible from the front.
  • When the board is installed in the drive, the operator has access to two 40-pin connectors. However, any cables connected to the connectors should only be touched if all power has been removed from the drive.
  • Removing power from the drive necessitates that someone familiar with the drive's installation confirm that all power has been removed. The drive has multiple current sources, and only someone familiar with the installation will be able to identify them and disconnect them. Use a full-featured testing device to ensure that all power has been removed before touching the board.

WOC is happy to assist you with any of your GE requirements. Please contact us by phone or email for pricing and availability on any parts and repairs.

FREQUENTLY ASKED QUESTIONS

What is DS3800HDRA?
It is a line driver/receiver board developed by GE.

What is the modular connector on the board used for?
The modular connector on the board is used for connecting to a drive.

What are the retention levers used for?
The retention levers are used to keep the board in place.

What are the jumpers and capacitors used for on the Line Driver/Receiver Board?
The Line Driver/Receiver Board has two jumpers and several capacitors. The specific use of these components would depend on the specific design of the board, which may vary.

What connectors are accessible from the front of the board?
The Line Driver/Receiver Board has two 40-pin connectors that are accessible from the front.