DS200SVMAG1A - SRC Voltage Monitor Board

SPECIFICATIONS

Part Number: DS200SVMAG1A
Manufacturer: General Electric
Series: Drive Control
Product type: SRC Voltage Monitor Board
Availability: In Stock
Country of Manufacture: United States (USA)

Functional Description

DS200SVMAG1A is a SRC Voltage Monitor Board developed by GE. It is a part of General Electric Drive Control system.

Features

• Termination boards installed in 13- or 12-slot VME card racks supply inputs to the central control module. Using a linked Operator Interface, which gives the operator access to software maintenance tools, this accumulated data can be retrieved.
• This little supplementary card is little. It performs the role of a voltage monitor. It has a board connector (P1) with ten pins that switch between the card's front and rear. The pins that protrude from the board's end will be used to solder the auxiliary board into place. Two factory-made drill holes on the board can be used to mount drills for additional board support.
• The board has the markings 94-v0, ttm4-10, and FA/00.

System Controller Inspection

• Check the controller's components for any possible shipping-related damage. Look for frayed or disconnected wires, connectors, or loose parts like relays or retainer clips.
• An appropriate ground point, preferably plant ground grid, must be connected to the ground lug in the bottom of the controller.

System core features

• There are numerous cores in the system controller. Cores are sheet metal housings with card carriers that hold printed wiring board (PWB) holders.
• Five boards can be put in the card carriers of a core at most. Moreover, a single core can support up to four high-density IO terminal boards. The combination of boards in a core is determined by the purpose for which it is intended.

WOC is happy to assist you with any of your GE requirements. Please contact us by phone or email for pricing and availability on any parts and repairs.

FREQUENTLY ASKED QUESTIONS

What is DS200SVMAG1A?
It is a SRC Voltage Monitor Board developed by GE.

What is the purpose of the termination boards installed in VME card racks?
The termination boards supply inputs to the central control module, allowing data to be collected and monitored from various sources.

What is the linked Operator Interface used for?
The linked Operator Interface provides access to software maintenance tools, allowing the operator to retrieve accumulated data.

What is the size of the supplementary card and what role does it perform?
The supplementary card is small and performs the role of a voltage monitor.