DS200PCCAG7A - POWER CONNECT CARD

SPECIFICATIONS

Part No.: DS200PCCAG7A
Manufacturer: General Electric
Product Type: Power Connect Board
Series: EX2000

DS200PCCAG7A is a power interface card that functions as an interface between the SCR power bridge and the drive. This component is a part of the EX2000 series of components. As this board lacks serviceable parts and cannot be repaired, the only alternative if it is confirmed to be defective is to replace it. When calling for service, you must have information about the board and the drive in which it is installed on hand.

• There are numerous ways to identify the drive. When you receive the drive's shipping container, the outside of the box is labeled with the model number, serial number, and other information. Make a note of the information and keep it somewhere safe.
• Alternatively, a label on the inside of the back panel can be used to identify the drive. It also includes the contact information you'll need when you call.
• You'll also need the board's identification information. The identifying information is listed on a label on the outside of the box when you receive the board. The best strategy is to jot down the information and keep it with your other critical documents or with the board's documentation.
• The information is also included in the printed materials in the shipment box, along with the manuals and flyers.
• If you don't know the information, you can inspect the board's exterior edge. The model number, serial number, and other details required when you call are all printed. SDCI is the power supply board. SDCI power supply boards are used by other G7 board groups, as well as G8, G9, and G10.
• Manual GEI-100161, the GE Industrial Control Systems PCCA Power Connect Card Manual, is the board manual. This manual is a GE original, and it is specific to the component.

The WOC team is always available to assist you with your EX2000 needs. Please contact WOC for further details.

 

Frequently Asked Questions

 

What is DS200PCCAG7A?
DS200PCCAG7A is a power interface card that functions as an interface between the SCR power bridge and the drive.

What is the board group number for DS200PCCAG7A?
The board group is G7, as shown by the G7 in the model number. Armature voltage scaling is determined by board group number, and because this component is a G7 board group, it is regenerative and ranges from 230 to 630 volts.

Which power supply board is utilized in conjunction with the DS200PCCAG7A?
SDCI is the power supply board.

How are the jumpers on the DS200PCCAG7A identified?
There are four wire jumpers on it. JP1, JP2, WP3, and WP4 represent the jumpers.